Free tools · in the optimizer
Optimizer tools
Each page opens the optimizer with its tool already on and an example to change: edge banding, fence settings, labels, miter cuts, and load checks.
-
Sheet cutting
Edge banding calculator
Free edge banding calculator: mark the banded edges of each part, take the band's thickness off the cut size, and see how much band to order with a waste allowance.
Open tool -
Sheet cutting
Panel saw fence settings
Free panel saw cutting plan that sets the fence once for each size: rip every sheet widest first, then crosscut, with each fence setting listed with its cuts.
Open tool -
Sheet cutting
Cut list labels
Free part labels from your cutting plan, on Avery 5160 or L7160 sheets, a Dymo 89 × 36 mm, or a Zebra printer, each with the part's name, size, sheet and a QR code.
Open tool -
Linear cutting
Miter cut calculator
Free miter cut calculator: set each part's end angles and the stock's width, then plan frame and trim cuts from your stock lengths, with kerf and reusable drops.
Open tool -
Load planning
Load compliance check
Check a truck or container load against its payload, balance and axle limits, and US Interstate or EU road rules, as loaded and after each stop, with the rule each check follows and the nearest fix.
Open tool
Every tool is in the Tools drawer of the free optimizer, with more on paid plans. Calculators by material start from a solved cut list instead.